|
International Orders
You must click
the
ADD TO CART button to the right, Clicking this button will add $20 to domestic shipping charges that are automatically placed on all orders.
|
|
|
|
||||
|
|
New
Waterslide |
|
|
|
|
|
Description |
Price |
|
|
|
2361 |
8 1/2 inch by 11 inch Clear New Formula Sheet |
$3.25 |
|
|
|
2361-4 |
|
$11.75 |
|
|
|
2361-SPC |
*Sampler Pack* |
$19.25 |
|
|
|
|
(Not all laser printers are compatible with these papers.) |
|
||
|
|
**************************************************************** |
|
||
|
|
Peel-n-Stick |
|
||
|
|
Description |
Price |
||
|
4001 |
8 1/2 inch by 11
inch Peel-n-Stick Clear Sheet |
$2.85 |
|
|
|
4001-4 |
8 1/2 inch by 11
inch Peel-n-Stick Clear Sheet |
$10.25 |
|
|
|
4001-SPC |
*Sampler Pack* |
$18.30 |
|
|
|
4001-W |
8 1/2 inch by 11
inch Peel- n- Stick Sheet |
$2.95 |
|
|
|
4001-4W |
8 1/2 inch by 11
inch Peel- n- Stick Sheet |
$10.50 |
|
|
|
4001-SPW |
*Sampler Pack* |
$18.75 |
|
|
|
4001-IJ |
8 1/2 inch by 11 inch Peel-N-Stick Clear (Ink Jet) |
$3.85 |
|
|
|
4001-4C |
8 1/2 inch by 11
inch Peel- n- Stick (Ink Jet) |
$11.75 |
|
|
|
4001-SPC |
*Sampler Pack* |
$18.30 |
|
|
|
4001-W |
8 1/2 inch by 11
inch Peel- n- Stick (Ink Jet) |
$3.85 |
|
|
|
4001-4W |
8 1/2 inch by 11
inch Peel- n- Stick (Ink Jet) |
$11.75 |
|
|
|
4001-SPIJW |
*Sampler Pack* |
$18.30 |
|
|
|
**************************************************************** |
||||
|
|
Ink Jet |
|
||
|
|
Description |
Price |
|
|
|
3161 |
8 1/2 inch by 11 inch Clear Ink Jet Sheet |
$3.25 |
|
|
|
3161-4 |
|
$11.50 |
|
|
|
3161-SPC |
*Sampler Pack* |
$18.25 |
|
|
|
3161-W |
8 1/2 inch by 11 inch White Ink Jet Sheet |
$3.65 |
|
|
|
3161-4W |
|
$11.95 |
|
|
|
3161-SPIJW |
*Sampler Pack* |
$19.75 |
|
|
|
|
See
(Note)* Below for Ink Jet
Information |
|
|
|
|
|
NEW Peel n Stick and Waterslide Alignment Decals |
$4.95 |
|
|
|
|
NEW
Vinyl Alignment Dots 1/8 inch These are signally cut dots like used by major rod companies 25 per strip placed 3/8 inch apart |
$14.99 |
|
|
|
|
Miscellaneous |
|
|
|
|
|
Description |
Price |
|
|
|
8001 |
Foam Squeegees - 12 Count |
$1.00 |
|
|
|
|
|
|
|
|
|
|
|
|
||
(Note) * - If you are trying to make your own decals with (Ink Jet) paper , you will need to do the following;
Spray your printed sheet evenly with Krylon Acrylic Crystal Clear High Gloss spray or Krylon Fixative spray (which provides a non gloss finish). Allow 30 to 60 minutes to dry and set. (This product is available at any craft or hardware store such as Lowes or Home Depot, etc.
****************************************************************
Decal and Finishing
Solutions
|
Product Number |
Description |
Price |
|
|
6391 |
Micro Sol Setting Solution -1oz |
$4.50 |
|
|
6392 |
Micro Set Solvent Solution -1oz |
$4.50 |
|
| 6394 | Liquid Decal Film Solution-1 oz | $4.50 |
 |
|
6393 |
Peel n' Stick/Vinyl App Fluid- 2oz plus plastic squeegee | $11.95 |
|
|
|
Micro Liquid Decal Film MSDS SHEET
Everyone should have Micro Liquid Decal Film who models and uses decals. Especially if you have been at it for some time. The typical decal scrap box is not the best place to store decals. Exposed to air, sunlight, and moisture, great swings of temperature or general abuse, and decals will go bad. Or maybe you just always had trouble putting on thin stripes. Micro Liquid Decal Film solves all of those problems and makes a decal which for whatever reason is bad, work again just like new almost immediately. Of course if you have already put it in water it is too late. So if you have some old decals you really have to use, coat them with Micro Liquid Decal Film to be sure. Or if there is any indication that you might have a problem, don't take a chance, you can solve the problem on the spot. Simply take a small brush and coat the image on the decal you want to use. Allow to dry for 20 minutes. Apply the decal as usual. It's that simple.
Micro Sol MSDS SHEET
Micro Sol setting solution is for
the most difficult irregular surfaces you find on models. It completely
softens the Decal allowing it to drape down onto the surface of the model
conforming perfectly and without distortion. You can get the most amazing
results in seemingly impossible places, because Micro Sol actually makes the
decal part of the paint. For that reason you should coat Micro Sol on for
only a few seconds and then leave it alone, it does the work. Do not touch
until dry as the decal is very soft at this stage and could be easily
damaged.
Micro Set MSDS SHEET
Micro Set is a very versatile decal setting solution that does several things to the decal to improve application. Micro Set should be applied to the surface of the model where you will be sliding off the decal. Micro Set prepares the surface with special wetting agents that cuts the oils in new paint and converts the adhesive on the back of the decal to a stronger and more lasting one. And finally, Micro Set slightly softens the decals film to make it more flexible so that it can conform better to the model's surface. Better adhesion by the decal to the model prevents tiny air bells from occurring and results in an invisible carrier film or the so called 'painted on look'.
